[ProArt Display] Regarding the PA279CV/PA329CV/PA328CGV USB settings, why does it change from 3.2 to 2.0 after rebooting? | Official Support

ASUS Support FAQ

FAQ

Product PA279CV, PA279CV-J, PA279CV-R, PA328QV, PA329CV

[ProArt Display] Regarding the PA279CV/PA329CV/PA328CGV USB settings, why does it change from 3.2 to 2.0 after rebooting?

ProArt series LCD monitors PA279CV/PA329CV/PA328CGV can use USB Type-C cable for image transmission and data transmission,

Among them, because the USB Type-C itself is limited by its own specifications, there have USB setting option in the OSD setting to choose USB3.2/USB2.0.

Among them, if the device is turned off and then turned on again, if this setting is set to USB 3.2 before shutting down,

After rebooting, it will return to USB2.0.

This is the setting of the device itself, which is normal and cannot be modified.

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

The above information may be partly or entirely quoted from external websites or sources. Please refer to the information based on the source that we have noted. Please directly contact or inquire via the sources provided if there is any further question. Please note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could differ depending on software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ