- CPU / Speicher-Support
- Treiber & Hilfsprogramme
- Wissenswertes
- Handbuch & Dokument
- Garantie
- Mehr Service
BIOS & Firmware
- Treiber & Tools
- BIOS & Firmware
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
Improve system stability.
01. Fix the issue that the system may hang when using Dell U2410 LCD monitor.
02. Fix the issue that Dell Multimedia keyboard or Logitech G15 may not be detected during POST.
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
01. Support setting SATA-5 and SATA-6 to IDE mode when SATA 1-4 is set to AHCI or RAID mode.
02. Fix the issue that L3 cache size may be incorrect in DMI table when using dual-core CPU with L3 cache.
03. Fix the issue that the fan speed may be slower, if enabled Q-Fan function in AI suite,
04. Fix the issue that certain network card can not be detected on PCIE Slot.
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
Fix the issue that onboard Lan may not work normally when using certain AM3 CPU.
Fix the issue that the system may not be able to resume from S3 when use ECC memory x 4 with ECC function enabled in BIOS.
01. Fix the problem that it may show " Pressed" during P.O.S.T after restarting the OS.
02. Support AOD3 function.
Update Express Gate.
Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
Support up to 1200MHz DDR2 Memory since this BIOS version.
Change the item "Power On By PS/2 Device" to "Power On By PS/2 Keyboard "and "Power On By PS/2 Mouse" in bios setup.
Fix the probelm that system may not be able to adjust CPU Multiplier by TurboV.
01. Improve the stability for memory.
02. Fix the problem that EPU function may make system freezon if use AM2 CPU.
01. Fix the problem that the value of AM2 CPU vcore can't be adjusted to the value lower than default.
02. Improve the compatibility for certain memory.
Initial release.