[NUC] Código de error 10 en el Administrador de dispositivos para la tecnología de sonido inteligente en NUC.

Resolución

 

  • Realice un reinicio en frío (mantenga presionado el botón de encendido hasta que la PC se apague y luego encienda la NUC de Intel). Si el problema persiste, continúe con el siguiente paso.
  • Actualice a la última versión del controlador de audio de alta definición Realtek*.
    • Si conoce el número de modelo de su NUC, puede encontrar este controlador en el Centro de descargas.
  • Actualice a la última versión del BIOS.
  • Restablezca los valores predeterminados de fábrica de BIOS:
    • Presione F2 durante el arranque para entrar en el BIOS Setup.
    • Presione F9 para establecer los valores predeterminados de fábrica.
    • Presione F10 para guardar y salir de BIOS Setup.

Contactar con Asistencia
Por favor, contacte con nosotros si la información de arriba no puede resolver su problema
  • Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
  • This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
  • ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.