[NUC] Cómo acceder al modo de configuración en los productos NUC9

Resolución

Cuando una unidad no puede ingresar al menú de configuración, siga las siguientes instrucciones:

  1. Actualice el BIOS a la última versión o al menos posterior a la BIOS 0065.
  2. Arranque el dispositivo.
  3. Ingrese al BIOS presionando la tecla F2.
  4. Navegue a Boot y seleccione Secure Boot. Luego, seleccione la opción Secure Boot.
  5. Asegúrese de que Secure boot = Enabled y que Secure Boot Mode = Standard.
  6. Presione F10 para guardar y reiniciar.
  7. Nuevamente, ingrese al BIOS presionando la tecla F2.
  8. Navegue a Boot>Secure Boot y seleccione Secure Boot.
  9. Cambie el Secure Boot Mode a Custom. Deje Secure Boot como Enabled.
  10. Presione Reset To Setup Mode.
  11. Presione F10 para guardar y reiniciar.
  12. La próxima vez que el dispositivo se ponga en modo de configuración de Secure Boot, el Intel NUC9 realmente ingresará al modo de configuración.

Contactar con Asistencia
Por favor, contacte con nosotros si la información de arriba no puede resolver su problema
  • Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
  • This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
  • ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.