BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1.Update CPU MicroCode
2.Improve system performance
About more intel information, please visit
https://www.asus.com/News/z78W1yPuEHJafb1X
Improve system performance
1.Support auto detection of optimized performance tuning function for Haswell V3 CPU, Broadwell V4 CPU
2.Update Intel RC code and Microcode
3.Support dTPM 2.0 and Bit Locker WHQL test for SHA256
4.Improve system performance
1.Support ASUS key and boot status on post screen right-bottom corner.
2.Support INT 19 postponed and immediate function
3.Update microcode / ME version /GrantleyRefresh BETA Intel RC code version
4.Update INTEL SATA and sSATA RSTe matrix Raid of version
5.Support Endless PXE of Boot Seek function.
6.Support DIMM temperature sensor enable/disable for ASMB8 sensor monitor in PEI and BDS ready to boot phase.
7.Improve system performance and stability.
1. Improve compatibility with BC57840 and I210.
2. Remove option item Enabled in S3-S4-S5 from DeepSx Power Policies.
3. Update GrantleyRefresh Intel RC code / ME version.
4. Support SCELinux dump NVRAM items.
5. Modify to sync "Fan Curve" and "power restore control" of BMC with BIOS setting
6. Improve compatibility with NV M60 card.
7. Modify IPV6 Dynamic item sync with IPV4 from Dynamic-Obtained by BMC running DHCP to DynamicBmcDhcp.
8. Add Memory freq. 2400 option to support Broadwell CPU.
1. Follow AMI document to Improve AHCI stability and security when trigger SW SMI.
2. Improve compatibility with Intel X520DA2.
3. Improve compatibility with some VGA card. (ASUS EAH-6750, NVIDIA K80, GTX980, M40)
4. Improve system stability.
5. Improve compatibility of UEFI Windows in ISCSI HDD.
6. Support show UEFI HDD info. in POST screen.
7. Support NVMe devices.
8. Improve compatibility when E5-2620v3 CPUs with 2108 RAID card.
9. Support INTEL TXT function and enable TXT related setting.
10. On Board VGA supports Wide sreen resolution 1920x1200 under OS.
11. Supports 4Kn HDD.
12. Support to boot up with Broadwell-EP processors.
1. Update Intel Microcode revision to 71.
1. Modified Fan setting control stepping in manual mode.
2. Improve compatibility for some VGA cards.
3. Fix LSI 9240-8i may show yellow mark on the device manager.
1. Added DIMM location info in RAM ECC event log.
2. Improve the system stability.
First release.
ASMB8-iKVM Firmware 1.09.4 for RS400-E8 series server system.