[Phone] Why the inside of the camera lens get foggy? | Official Support

ASUS Support FAQ

FAQ

[Phone] Why the inside of the camera lens get foggy?

If the temperature difference between the inside and outside of the camera lens cap is big, it may cause the lens to be foggy or condensed water droplet. The fog and water droplet may disappear after standing the phone in a while, it is normal, please feel free to use the phone.

You may follow the steps below to remove the fog or water droplets on the camera lens:

1. Use a dry eyeglass cloth/soft cotton cloth to wipe the lens radially in one direction.

2. If you have Humidity Control Box, you may remove SIM tray and then place the phone in the box to remove fog or water droplet.

3. If the fog or water droplet still persist, please contact your local ASUS service center for further assistance.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ