[SSD Enclosure] How to install SSD into ROG Strix Aiolos SSD Enclosure?
In this article, we will introduce how to install SSD into ROG Strix Aiolos SSD Enclosure.
Notice：Please visit Tech Specs to check SSD compatibility. For more info, please visit ASUS Download Center.
Instruction steps
1. Slide the latches on both sides of the enclosure to remove the back cover.
2. Loosen and remove the SSD retaining screw by turning it counter-clockwise.
3. Align the SATA/M.2 SSD and gently insert it into the slot at an angle, ensuring the contacts are fully seated.
4. Gently press the SSD down and place the retaining screw (removed in Step 2) into the semicircular notch above the SSD, as shown in the diagram below. Then turn the screw clockwise into the screw hole to secure it.
5. Align the back cover with the bottom edge and close it at an angle until you hear a 'click,' indicating the latches are secured. Installation is now complete.
Notice：If you are installing a brand new SSD module, you will need to format and allocate the partition of your SSD storage.
Please refer to this FAQ - How to display the ROG Strix Arion drive on your PC with a brand new SSD installed?
FAQ
1. What form factors does ROG STRIX AIOLOS support?
It supports M.2 NVMe PCIe and SATA SSDs with B+M key or M key, both in 2242, 2260, and 2280 form factors.