[ProArt Display] How to change the display output by windows to portrait? | مساعدة

ASUS الدعم الأسئلة الشائعة

FAQ

المُنتج PA24AC, PA27AC, PA329C, PA329Q, PA32UC, PA32UC-K, PA32UCX, PA32UCX_K, PQ22UC

[ProArt Display] How to change the display output by windows to portrait?

Most models of ProArt series LCD Monitor support turning the screen rotation into an upright mode,

And OSD menu will automatically change to an upright display as the screen rotates.

The output from Windows needs to be changed the setting to upright from the PC to correspond to the rotation of the screen.

The following uses Windows 10 as an example:

1.Right-click on desktop and click [Display Settings]:

2. Select the ProArt monitor you want to adjust to upright.

If you are not sure about 1 or 2, you can click [Identify], the corresponding number will be displayed on the screen.

3.Find the[Display resolution] setting and change the setting to [portrait], the screen's display will change to portrait.

* Disclaimer: The screen content of this setting interface is copyrighted by Microsoft.

Yes No

التواصل مع فريق الدعم

يُرجى التواصل معنا إذا لم تساعد المعلومات الواردة أعلاه في حل مشكلتك.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS الدعم الأسئلة الشائعة

العودة لأعلى