[Motherboard] Liquid recommendation if MB is intergraded with water block | Official Support

ASUS Support FAQ

FAQ

[Motherboard] Liquid recommendation if MB is intergraded with water block

- The use of specifically engineered coolants that contain none-corrosion, none-scale, and biological inhibitors is mandatory to prevent damage to the water block surface.

- Do not mix coolants or toppings with any other liquid.

- Do not mix coolants from different series even if the coolants are from the same brand.

- It is recommended to replace the liquids every12 months for the best performance.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ