[NUC] NUC na systemie Linux* automatycznie restartuje się po wyłączeniu.

Rozwiązanie

  1. Naciśnij klawisz F9, aby załadować Domyślne ustawienia.
  2. Naciśnij klawisz F10, aby Zapisać i wyjść.
  3. Uruchom system operacyjny.
  4. Naciśnij przycisk zasilania, co spowoduje prawidłowe wyłączenie systemu operacyjnego.

    System wciąż się zrestartuje.
     
  5. Naciśnij klawisz F2 podczas uruchamiania, aby uzyskać dostęp do Ustawień BIOS.
  6. Przejdź do sekcji Zasilanie.
  7. Zmień Zasilanie USB S4/S5 z WYŁ na WŁ.
  8. Ustaw Budzenie przez USB z S5 z WŁ na WYŁ.
  9. Zmień Zasilanie USB S4/S5 z WŁ na WYŁ.
  10. Naciśnij klawisz F10, aby Zapisać i wyjść.
  11. Uruchom system operacyjny.
  12. Naciśnij przycisk zasilania, co spowoduje prawidłowe wyłączenie systemu operacyjnego.

    System powinien już normalnie się wyłączyć.

Skontaktuj się z działem pomocy
Skontaktuj się z nami, jeśli powyższe informacje nie rozwiążą Twojego problemu
  • Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
  • This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
  • ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.