ROG Strix Flare

    CUSTOMIZABLE
    ILLUMINATED BADGE

    ROG Strix Flare is ready to project your unique personal style. Design your own marque on the included blank badge, then insert it into the keyboard and see it illuminated with Aura lighting. The customization possibilities are endless!

    DESIGN TIPS & TEMPLATES

    Design tips and templates are available for download, here. The template uses precise dimensions, but printer settings might affect the actual output size. Check your setup, produce a test print, and make sure the printed dimensions are correct before committing your design to the badge.

    • Create your design within the defined viewable area of the badge.

    • For the best color saturation, apply your design to the underside of the badge. (You’ll need to flip your design horizontally to create a mirror image.)

    • White or light-colored designs offer the best color saturation.

    4 EASY WAYS TO MAKE YOUR OWN

    There are unlimited ways and materials with which to customize your badge, but here are four easy-to-follow ideas to get you started. For more assistance, read this in-depth article.

    • Sticker

    • Freestyle

    • Stencil

    • Professional printing

      1. Download the design template, here.
      2. Create your mirrored badge design on the computer and print it out on sticker paper.
      3. Cut out your design with a craft knife or scissors.
      4. Using the mirrored viewable area as a reference, stick the design on the bottom of the badge.
      5. Flip the badge and insert it into your ROG Strix Flare — done!
      1. Download the design template, here.
      2. Print out the template and use the mirrored blank template as a reference for the viewable-area position.
      3. Draw your mirrored design freehand with paint or other media.
      4. Wait for your design to completely dry.
      5. Flip the badge and insert it into your ROG Strix Flare — done!
      1. Download the design template, here.
      2. Create your mirrored badge design on the computer and print it out on sticker paper.
      3. Cut out your design with a craft knife or scissors.
      4. Position the hollowed-out sticker onto the badge, and apply paint or other media over your design. Be careful not to overload your brush. Dab lightly to prevent bleeding underneath the sticker.
      5. Wait for your design to dry, and then remove excessive sticker material.
      6. Flip the badge and insert it into your ROG Strix Flare — done!
      1. Download the design template, here.
      2. Create your mirrored badge design on the computer.
      3. Contact a laser-etching or professional printing company; clearly communicate your design needs and end-goal, and await further instructions.