[Lyra] [Advanced] How to set Access Point (AP) mode for Lyra? | Official Support

ASUS Support FAQ

FAQ

Product Lyra, Lyra Mini, Lyra Trio

[Lyra] [Advanced] How to set Access Point (AP) mode for Lyra?

Through ASUSWRT Web Interface

1. Make sure your NB/PC is connected to Lyra.

2. Open browser and use http://www.asusrouter.com to enter web interface.

3. After logging in to Lyra web interface, you can see the Access Point (AP) mode option at the bottom of the Administration page.

Through Lyra app

1. Make sure your mobile device is connected to Lyra.

2. Launch the Lyra app and tap into the Settings page from the left drawer of app.

3. You can see the Operation Mode option in the page, and choose Access point mode option.

Please wait 3 minutes while the settings are updated and you will see the green lights blinking on Lyras during this time.

If any feature doesn't work after changing operation mode, please manually reboot the 2nd and 3rd Lyra in the network.

Yes No

Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Support FAQ