[Lyra][Setup]How to set up a wired Lyra system? (Ethernet backhaul) | Official Support

ASUS Support FAQ

FAQ

Product Lyra, Lyra Mini, Lyra Trio

[Lyra][Setup]How to set up a wired Lyra system? (Ethernet backhaul)

Here we take a Lyra network of 3 Lyras as an example:

1. Set up 3 Lyra nodes via Lyra app. (Only connect one Lyra node to the existing modem/router via ethernet cable).

2. Wait until all 3 Lyra nodes are in solid blue.

3. Connect the Ethernet cable from the Primary node to the secondary node, then duplicate from secondary node to the third one.

4. Wait until the second and the third node both show a solid green light once they are connected by the ethernet cable.

5. If the second or the third device are not showing solid green light, please unplug and plug-in Ethernet cable again and also make sure your firmware is up to date on all nodes.

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Support FAQ