[Specification] How to judge the current status of ZenWiFi Series Router from LED color?
Please refer to the table below for detailed definitions of LED colors :
Note: The environment in which the router is located may make the LED color look different.
Unit | Status | LED color | Flashing | |
Router | Connected to the Internet | White |
| No |
Connected, still under system optimization | Green |
| No | |
WPS button pressed | Blue |
| Yes | |
Disconnected from internet | Red |
| No | |
Node | Good backhaul connection to router, or connected using Ethernet backhaul | White |
| No |
Weak backhaul connection to router | Yellow or Orange |
| No | |
The node is adding or reconnecting to the primary router. | Blue |
| Yes | |
Enable Ethernet backhaul mode, and the node is not wired to the primary router. | Red |
| No | |
Router/node | Reset button pressed | Yellow or Orange |
| Yes |
Starting up | Green - pulsing |
| Yes | |
Ready for setup, not yet configured | Blue |
| No | |
Rescue mode | Magenta |
| No |
How to get the (Utility / Firmware)?
You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.
If you need more information about the ASUS Download Center, please refer this link.