[Desktop Chassis] ProArt PA602 front panel disassembly and assembly precautions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.

 

Preparation
Phillips screwdriver PH2

 

Step1. Press the latches on both sides of the front panel.

Step2. Lift the front door frame upwards to remove it.

Step3. Unscrew the eight screws on front panel.

Step4. Move the front panel to the left and remove the screw from the IR dust sensor.

Step5. Removal of front panel completed.

 

 

Visit ASUS official website to learn more about ProArt PA602 https://www.asus.com/motherboards-components/gaming-cases/proart/proart-pa602/