[Desktop Chassis] ProArt PA602 feet and built-in wheels disassembly and assembly instructions | Oficiálna podpora spoločnosti

ASUS Podpora Časté otázky

FAQ

Scan QR code to open this page with your smart phone. PA602

[Desktop Chassis] ProArt PA602 feet and built-in wheels disassembly and assembly instructions

Notice
1. Please wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.

Preparation
Phillips screwdriver PH2

Step1. Tear the rubbers from the bottom.

Step2. Unscrew the 12 screws to remove the feet.

Step3. Unscrew the 2 screws to remove the built-in wheels.

Step4. Removal of feet and built-in wheels completed.

Visit ASUS official website to learn more about ProArt PA602 https://www.asus.com/motherboards-components/gaming-cases/proart/proart-pa602/

Boli tieto informácie užitočné?

Yes No

Kontaktovať podporu

Ak informácie uvedené vyššie váš problém nevyriešia, kontaktujte nás

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Podpora Časté otázky

Späť navrch