Upgrade Warranty: Here.
* Please note that the availability of the Premium Care product lines might differ by country.
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
The Latest Beta BIOS.
Revised CPU cache descriptors according to "BIOS Writers Guide" Rev 1.5 to support P4 Celeron 2GHz.
Add microcode update for NorthWood C-1 stepping (PGA478) beta.
Revised CPU cache descriptors according to "BIOS Writers Guide" Rev 1.5 to support P4 Celeron 2GHz.
Add microcode update for NorthWood C-1 stepping (PGA478) beta.
Fixed Secure Digital Storage Device resource conflict.
Update DMI CPU max speed
Fixed Secure Digital Storage Device resource conflict
Update DMI CPU max speed
Update Onboard Lan bootrom to version 4.1.04
Fix flash disk boot failure (M-system, model is M-SYSTEM FFD-250 IDE).
Fix wrong L2 cache size for Willamette Celeron
Add the support for Willamette Celeron.
Add microcode update for Willamette Celeron. Update microcode update for Willamette wC-1 stepping, wD-0 stepping, and NorthWood B-0 stepping (PGA478)
Fix the system sometimes reset automatically in POST 0B with some cache controller.
Add 48-BIT IDE support
Update Onboard Lan bootrom to version 4.1.04
Fix flash disk boot failure (M-system, model is M-SYSTEM FFD-250 IDE).
Fix wrong L2 cache size for Willamette Celeron
Add the support for Willamette Celeron.
Add microcode update for Willamette Celeron. Update microcode update for Willamette wC-1 stepping, wD-0 stepping, and NorthWood B-0 stepping (PGA478)
Fix the system sometimes reset automatically in POST 0B with some cache controller.
Add 48-BIT IDE support
Fix two unknown devices appears in Windows Device Manager if M/B comes without Memory Stick/Secure Digital.
Power temperature is shown as [N/A] if no sensor is attached.
Change I-Panel setup item option string from "group 3" to "Group 3"
Add Smart Card Reader item option.
Fix system hangs at POST code "EE" sometimes.
Fix NT 4,0 boot fails if speech is enabled.
Rename "USB Function" item to "USB 1.1 Function".
Fix system hangs sometimes when CPU frequency is set to 133MHz and CPU/memory frequency ratio is set to [3:4].