Support Harpertown E0/C0 and Wolfdale-DP E0/C0 processors.

DSBF-D12/SAS BIOS Version 1006

1. Fixed the problem that the CPU information is not correct in setup when putting one CPU in socket 2 only.
2. Add 2 sec delay to keyboard error
3. Fixed Winbone W39V080F device flash was unstable.
4. Fixed CPU L2 Cache display issue at post time.

DSBF-D12/SAS BIOS Version 1005

1. Fixes CPU Speed was wrong under BIOS setup menu and POST screen. The speed showed "3.10GHz", but it should be 3.16GHz.
2. Fixed the problem that PCI-E VGA card does not work when memory is great than 3.5G with Dempsey processor.
3. Fixed the problem that when using Harpertown processor, no matter TM2 is disable or enable the MSR 1A0h bit 13 has no difference.
4. Fixed the problem that DMI Table Type 04 information is not correct while mixed stepping with G0 in CPU1.
5. Fixed DEMPSEY CPU information display issue in SETUP.
6. Fix when Intel Xeon X5355 2.66GHz/Stepping G0 in CPU1 + Intel Xeon X5355 2.66GHz/Stepping B3 in CPU2 check DMI Table Type 04 - Processor Information, The information shown will be incorrect.
7. Fix IF Intel Xeon X5355 2.66GHz/Stepping B3 in CPU1 + Intel Xeon X5355 2.66GHz/Stepping G0 in CPU2 check DMI Table Type 04 - Processor Information, The Information shown will be incorrect.
8. Select "Discard Changes" in BIOS Exit panel, it will change Boot Priority as Load Setup Default.
9. Fix When using LSI ZCR SAS card with RAID enable, the Floppy will dispear.
10. Reduce the time spent on the extended memory test when user wish to skip the memory test above 4G.
11. Fixes first boot with no HDD install.shutdown and attached SATA HDD then boot again.
12. Fixes when PS/2 MouseSupport set Disabled, System boot into Windows Server 2003, both of mouse and keybaord can't work.
13. Fixes ASMB2_ASMB3-SOL Bug#: When plugged ASMB3-SOL card on system, BIOS Hardware Monitor was abnormal sometimes. But it showed normally in ARC.
14. Fixes ASMB2_ASMB3-SOL Bug#: When Client connected to Server then enter to BIOS setup menu, press function key like "F1","F5" etc.. The pop panel was blinking. This issue happened in Hyper Terminal & Linux OpenIPMI(Text mode). But this issue didn't happen in ARC and Linux OpenIPMI(X-Window).
15. Fixes ASMB2_ASMB3-SOL Bug#:If pressing "pause" to stop booting when server BIOS POST, we can't make it to continue booting by remote console.
16. Remove "Setup Menu"->"Server"->"Console Redirection"->"Console Connection" item
17. Change default value of "Setup Menu"->"Advancded"->"Intel EIST support" to be disable.

Fixes "Crystal Beach Configure Enable" item disappeared when Non-Intel LAN card installed.

1. Flash BIOS command：phlash16 /mode=3[BIOS file name]
2. Onboard Device Option ROM(s)：
1. Video：BK-ATI VER008.005.023.000
2. LAN：Intel(R) Boot Agent GE v1.2.36
3. SATA RAID：Intel(R) RAID for SATA - v5.6.2.1002, LSI MegaRAID Software RAID BIOS Version A.01.07251734R
4. AHCI：Serial ATA AHCI BIOS, Version iSrc 1.08 09072006
5. AHCI RAID：Serial ATA AHCI BIOS, Version iSrc 1.08 09072006
6. SAS：MPTBIOS-6.08.05.00 (2006.08.02)