[Desktop Chassis] TUF Gaming GT502 ARGB Light board disassembly and assembly precautions | Official Support

ASUS Support FAQ

FAQ

Product TUF Gaming GT502

[Desktop Chassis] TUF Gaming GT502 ARGB Light board disassembly and assembly precautions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.

Tools required

Phillips screwdriver PH2

1. Open and remove the right side panel.

2. Remove the HDD bracket by removing the 2 screws.

3. Remove the 2 screws on the ARGB light board.

4. Removable ARGB Light Board.

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ