[Desktop Chassis] TUF Gaming GT502 feet disassembly and assembly instructions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.

 

Preparation
Phillips screwdriver PH2

 

Step1. Open the both side panel and remove them.

Step2. Unscrew the 4 screws at the bottom left.

Step3. Remove the HDD bracket by removing the 2 screws.

Step4. Unscrew the 2 screws under the HDD bracket.

Step5. Unscrew the 2 screws at the bottom right rear.

Step6. Removal of feet completed.

 


Visit ASUS official website to learn more about TUF Gaming GT502 https://www.asus.com/motherboards-components/gaming-cases/tuf-gaming/tuf-gaming-gt502/