BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1. Reset system after pressing F10 for saving BIOS changes.
2. Improve compatibility for High Point RocketRAID 2640.
[Warning]
* If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5009 firstly before updating the BIOS.
1. Reset system after pressing F10 for saving BIOS changes.
2. Enable HotPlug for SATA ports by default.
3. Improve stability of Crachfree.
4. Improve compatibility for High Point RocketRAID 2640.
[Warning]
* If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5009 firstly before updating the BIOS.
1. Patch Adaptec ASR-6805E and ASR-6405 RAID Cards, some of Adaptec RAID cards may fail to link PCIe root port during POST if Ivy Bridge CPU installed.
2. Not allow to update BIOS by CAP file from version less than 5xxx.
3. Add options [Network Stack] in BIOS Setup.
[Warning]
* If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5009 firstly before updating the BIOS.
1. Patch Ctrl+M can't enter LSI RADI Card Utility after booting to any USB/HDD.
2. Patch can't boot to OS when Promise RAID Card is plugged.
3. Patch can't boot to OS when Adaptec RAID Card is plugged.
4. Support NTFS file system in EZFlash.
5. Change the default setting of "Redirection After BIOS POST" to BootLoader rather than Always Enable.
6. Support default boot order of Network devices.
[Warning]
*If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5009 firstly before updating the BIOS.
1. Support Windows 2012.
2. Revise BIOS password length strings.
[Warning]
* Pls noted once BIOS flashed to version 5009 successfully, users can't flash back to old version manually.
Add SATA port number into SATA device string that appears in BIOS Setup\Boot page and BBS Popup Windows.
1. Add "Parallel Port Configuration" item on BIOS Setup->Advanced->OnBoard Devices Configuration page.
2. Fixed SATA Port #1 will be changed to Boot Option #1 automatically after computer boots twice.
1. Updated ME firmware to 02.02.00.042.0.
2. Support new CPUs. Please refer to our website at: http://www.asus.com/Server_Workstation/Server_Motherboards/P8BX/#CPUS
* Enable support for Intel Next Gen 22nm Processor MP version CPU.
[Note]
Pls follow attached SOP to upgrade BIOS from older BIOS to version 2xxx.
Fix the issue of that system can't boot WINPE via PXE when press F12 key.
Support Hot Plug Function with AHCI and RAID mode.
1. Support SLP function.
2. Support onboard AST 1100 VGA chip.
3. Add device to support ASWM Enterprise.
1. Fix it is difficult to enter setup by press del key
2. Revise warning strings in recovery mode
3. Update LSI Raid Option ROM Version to A.10.03031333R
4. Support Onboard LSI Mega Raid function and fixed SATA port detected issue.
First release.