1. Update CPU uCode
2. Improve system performance

Improve system performance

1.Update CPU uCode
2.Improve system performance

1.Improve system performance
2.Update windows update HWID to 9

[If using FlashBack, please rename to "X99MWS.CAP" after download.]
Improve system performance and stability.

1. Improve system performance and stability.
2. Support Intel Turbo Boost Max Technology 3.0.
[Using FlashBack, please rename to "X99MWS.CAP" after download.]
-----------X99-M WS Steps----------------
Step1: USB BIOS Flashback update BIOS
Step2: Clear CMOS
Step3: Install Broadwell-EP CPU
Step4: Start to use (Already upgrade to support Broadwell-EP CPU)
---------------------------------------------------

[Using FlashBack, please rename to "X99MWS.CAP" after download.]
1. This version only supports USB BIOS Flashback to upgrade to BIOS 3003
2.Improve system performance and stability.
3.Update Broadwell-E CPU microcode from 0x19 to 0x1A
-----------X99-M WS Steps----------------
Step1: USB BIOS Flashback update BIOS
Step2: Clear CMOS
Step3: Install Broadwell-EP CPU
Step4: Start to use (Already upgrade to support Broadwell-EP CPU)
---------------------------------------------------

[Using FlashBack, please rename to "X99MWS.CAP" after download.]
1. Improve system performance and stability.
2. Support Broadwell CPUs.

**Please use “USB BIOS Flashback ” upgrade to BIOS 3002.
-----------Steps----------------
Step1: USB BIOS Flashback update BIOS
Step2: Clear CMOS
Step3: Install Broadwell-EP CPU
Step4: Start to use (Already upgrade to support Broadwell-EP CPU)
------------------------------------

1. Improve compatibility with some GPU card.
2. Revised GPU Post doesn't report GPU card info which plugged on PCIEX16_3 when using 28 lane CPU.
3. Improve system stability.

1. Improve system exception control.
2. Supports some large size HDDs as Logical Sector.
3. Improve compatibility with PIKE 2108 and to some GPU cards.
4. Improve compatibility with some GPU cards when installing 28 lane CPU.
5. Modify PCI slot number shows in device manager.
6. Modify SATA port number in EZ mode when a CD-ROM is plugged in SATA2 controller.
7. Update EC F/W to MBEC-X99-9940.