[NUC] Comment installer Windows® 10 sur un NUC avec chiffrement BitLocker
Lors de la tentative d'installation de Windows® 10 sur une partition quelconque, le message suivant s'affiche :Windows cannot be installed to this hard disk space. BitLocker Drive Encryption is enabled on the selected partition. Suspend (also referred to as disable) BitLocker in the Control Panel, and then restart the installation
.
,"acceptedAnswer": {"@type": "Answer","text": "
| Note | The following steps will format the drive, deleting all data on it. If the data on the drive is irreplaceable, consider contacting a data recovery company. |
- Boot to the Windows installer.
- Press the key combination SHIFT+F10 which will open the Command Prompt window.
- Type diskpart and press Enter.
- Type list disk and press Enter. A list of storage devices will be printed in the Command Prompt window.
- Type select disk n and press Enter, where the n stands for the disk to be formatted.
- Type clean and press Enter
- Type exit and press Enter.
Windows ne peut pas être installé sur cet espace disque. Le chiffrement de lecteur BitLocker est activé sur la partition sélectionnée. Suspendez (également appelé désactivez) BitLocker dans le Panneau de configuration, puis redémarrez l'installation.
.
,"acceptedAnswer": {"@type": "Answer","text": "
| Note | Les étapes suivantes vont formater le disque, supprimant toutes les données qui s'y trouvent. Si les données sur le disque sont irremplaçables, envisagez de contacter une entreprise de récupération de données. |
- Démarrer l'installateur de Windows.
- Appuyez sur la combinaison de touches SHIFT+F10 qui ouvrira la fenêtre de l'invite de commandes.
- Tapez diskpart et appuyez sur Entrée.
- Tapez list disk et appuyez sur Entrée. Une liste de périphériques de stockage sera imprimée dans la fenêtre de l'invite de commande.
- Tapez select disk n et appuyez sur Entrée, où n représente le disque à formater.
- Tapez clean et appuyez sur Entrée
- Tapez exit et appuyez sur Entrée.