[Gaming Chassis] ROG Hyperion GR701 Case Side Panel Glass Replacement
Preparation
Tool
Phillips screwdriver PH2
Note: Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly.
Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.
Disassemble the side panel
1. Open the side panel (magnetic latch) , and lift it up to disassemble.
2. Change panel glass:
Release 6 screws (refer to red circle as picture below) and remove door hinge and hand grip from side panel. Replace with a new panel glass, then assemble the door hinge and grip back to finish the glass replacement.
Note: Please lay the glass panel on a flat table during disassembly and assembly and prevent glass from collision/drop/heavy pressure.
Assemble the side panel
Hold the side panel, put panel hinge pins into hinge knuckles of the chassis to assemble panel.
* Remind to aim 2 hinge pins into the hinge knuckles when assembly.