BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1. Reset system after pressing F10 for saving BIOS changes.
2. Enable HotPlug for SATA ports by default.
3. Improve stability of Crachfree.
4. Improve compatibility for High Point RocketRAID 2640.
5. Update UEFI Driver for Intel LAN I210.
[Warning]
*If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5008 firstly before updating the BIOS.
1. Not allow to update BIOS by CAP file from version less than 5xxx.
2. Fixed system can't wake up from S3 state by PS/2 keyboard.
[Warning]
*If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5008 firstly before updating the BIOS.
1. PATCH Adaptec ASR-6805E and ASR-6405 RAID Cards will fail to link with PCIe root port when doing Reset Aging.
2. Fixed press F2 during POST will enter EZFlash Utility.
3. Set the default of "Boot option filter" to "Legacy only".
[Warning]
*If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5008 firstly before updating the BIOS.
1. Patch Ctrl+M can't enter LSI RADI Card Utility after booting to any USB/HDD.
2. Patch can't boot to OS when Promise RAID Card is plugged.
3. Patch can't boot to OS when Adaptec RAID Card is plugged.
4. Support NTFS file system in EZFlash.
5. Change the default setting of "Redirection After BIOS POST" to BootLoader rather than Always Enable.
6. Support default boot order of Network devices.
[Warning]
*If your BIOS version is 2305 or older: Go to BIOS-Utilities to download and flash the BIOS to version 5008 firstly before updating the BIOS.
1. Support Windows 2012.
2. Revise Event Log strings.
[Warning]
* Pls noted once BIOS flashed to version 5008 successfully, users can't flash back to old version manually.
1. Add "Parallel Port Configuration" item on BIOS Setup->Advanced->OnBoard Devices Configuration page.
2. Fixed SATA Port #1 will be changed to Boot Option #1 automatically after computer boots twice.
1. Improve Power Performance.
2. Fix PIKE 2108 RAID Card Option ROM not executed.
1. Updated ME firmware to 02.02.00.042.0.
2. Support new CPUs. Please refer to our website at: http://www.asus.com/Server_Workstation/Server_Motherboards/P8BE4L/#CPUS
* Enable support for Intel Next Gen 22nm Processor MP version CPU.
[Note]
Pls follow attached SOP to upgrade BIOS from older BIOS to version 2xxx.
1. Support Hot Plug Function with AHCI and RAID mode.
2. Fixed 5805Z RAID card option ROM issue.
Update Intel raid option ROM to support 3TB HDD.
Supprot SLP function.
Add string of "ASUS P8B-E-4L ACPI BIOS Revision xxxx x64" at POST
First release.