Relative Topices
- [Troubleshooting] Wireless Router or Wireless Range Extender Wi-Fi signal is often disconnected in Repeater mode
- [Range Extender] How to Reset Your RP-AX50 Repeater?
- [Range Extender] How to Restore Your RP-AX50 Repeater Using Recovery Mode?
- [Range Extender] How to Update the Firmware on Your RP-AX50 Repeater?
- [Range Extender] How to Use the WPS Function on Your RP-AX50 Repeater?
[Range Extender] Understanding the LED Indicators on Your RP-AX50 Repeater
Introduction
This FAQ provides a quick reference guide to help you understand the various LED indicators on your RP-AX50 repeater. By interpreting these lights, you can quickly assess the device's operational status, identify potential issues, and troubleshoot common connectivity or setup problems at a glance.
RP-AX50 LED Indicator Meanings
Below is a detailed breakdown of each LED indicator, its possible states, and what each state signifies:
1. Power (PWR) LED
The Power LED indicates the RP-AX50's power status.
| LED State | Meaning | Troubleshooting / Advice |
|---|---|---|
| Green | The RP-AX50 is powered on and operating. | N/A (Normal operation) |
| Blinking Green | The RP-AX50 is starting up. | Please wait for the device to fully boot. Do not power off during this process. |
| Off | The RP-AX50 is powered off. | Check the power connection and power adapter. Ensure the device is plugged into a working outlet. |
2. WPS LED
The WPS LED indicates the status of the WiFi Protected Setup (WPS) function on your RP-AX50.
| LED State | Meaning | Troubleshooting / Advice |
|---|---|---|
| Blinking Green | WPS setup is in progress. | Wait for the WPS pairing process to complete. If it continues to blink for an extended period, try initiating WPS again on both the RP-AX50 and your device. |
| Off | WPS is not active. | N/A (WPS is not currently being used or has completed/failed). |
3. Signal LED
The Signal LED provides an indication of the connection strength between your RP-AX50 repeater and the Parent AP / Router.
| LED State | Meaning | Troubleshooting / Advice |
|---|---|---|
| Green | Strong signal. | N/A (Excellent connection to the Parent AP/Router). |
| Yellow | Normal signal. | The connection is good, but you might consider repositioning the RP-AX50 for a potentially stronger signal if optimal performance is desired. |
| Red | Disconnected from the Parent AP / Router. | Move the RP-AX50 closer to your main router/AP. Check the WiFi status and settings of your Parent AP/Router to ensure it's broadcasting. |
How to get the (Utility / Firmware)?
You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.
If you need more information about the ASUS Download Center, please refer this link.