[NUC] NUC Message:

ASUS Support FAQ

FAQ

[NUC] NUC Message: "Warning: System has recovered from an over-temperature condition. Please ensure proper airflow before continuing"

Resolution

Check for obstructions around the NUC's air vents.
Place the NUC in a well-ventilated area.
Load BIOS defaults:
- Press F2 during boot to enter BIOS Setup.
- Press F9 to load defaults.
- Press F10 to save and exit BIOS Setup.
Try different fan control settings in BIOS:
- Press F2 during boot to enter BIOS Setup.
- Go to Advanced > Cooling.
- In the CPU Fan Header pane, experiment with setting Fan Control Mode to Balanced and Cool.
- Press F10 to save and exit BIOS Setup.

If you've tried all the steps listed above and your NUC still has overheating or thermal issues, contact ASUS Support.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ