RS162-E4/RX4

Update BIOS to support new CPUs.
Support ASMB3-SOL PLUS.
Enable BMC DHCP function.
Pass win2008 WHQL.

RS162-E4/RX4 BIOS Version 1006

RS162-E4/RX4 BIOS Version 1006

Fixes "Crystal Beach Configure Enable" item disappeared when Non-Intel LAN card installed.

Version 1005

1. Fixes ASMB2_ASMB3-SOL, if use OpenIPMI tool connecting to server and enter BIOS setup menu, the Hot key "ESC" must be pressed twice to take effect.
2. Updates onboard video BIOS to be: BK-ATI VER008.005.030.000 BR yj19938a.003
3. Fixes Clovertown(E5300 Series)/Woodcrest(E5100 series) L1 Cache size was displayed incorrectly in BIOS Setup.
4. Updates onboard ESB2 SATA RAID ROM to be: LSI MegaRAID Software RAID BIOS Version A.01.01021804R.
5. Included the System Configuration Data for the Dual-Core Intel(R) Xeon(R) processor 5100 series: B-2 stepping processor signature 000006F6 (Woodcrest)
6. Included the System Configuration Data for the Quad-Core Intel(R) Xeon(R) Processor 5300 Series: B-3 stepping processor signature 000006F7 (Clovertown)

1. Updates onboard video BIOS
2. To write new IP setting only when user changed the BMC IP from BIOS setup menu
3. To have the BMC LAN "NetMask" setting item in BIOS setup menu
4. Fixes TS700-E4/RX8 Bug#: An error message showed "NT service registry error! Please reboot NT and run again" in the process of installing the program "Asus Update"
5. Fixes ASMB2_ASMB3-SOL Bug#: When press button "Reset to BIOS", there is a error message and shows:"Read POST state error, transmit not start.", server can't enter BIOS setup screen
6. Fixes TS700-E4/RX8 Bug#: In BIOS processor information table, CPU speed shows 2.30GHz, but currect speed is 2.33GHz
7. Fixes ASMB2_ASMB3-SOL Bug#: When press button "Ctrl+Alt+Del", server can't restart and shows word:"^_?" in SOL command line
8. Fixes ASMB2_ASMB3-SOL Bug#: If set baud rate to be 57600, the SOL screen would be not smooth and often lose characters

1. Fixes "MS-DOS 6.22" could not boot from onboard SAS HDD
2. Changes default values of "SYSTEM1 Target Temperature" and "SYSTEM2 Target Temperature" from 60 degree C to be 70 degree C

1. Supports new RS162-E4/RX4 fan control. Note(s):
a. Default "FBDIMM(s) Thermal Throttling" value = "ASUS MemCool FAN".
b. Changes "Fan Output Start Duty Cycle" value.
2. Fixes RS162-E4/RX4 If plug CPU on CPU2 slot,checking the CPU2 information under BIOS.The CPU's speed display incorrect value.

RS162-E4/RX4 BIOS Version 1001