Product
Lyra Trio
[Lyra Trio]How to tell the current state of Lyra Trio from its LED color?
Please refer to the below table for detailed definitions of each LED color.
| Device | Status | Bluetooth | LED Color | Flashing |
| General | Booting up | Blue | Y | |
| Boot up complete (not connected with app) | ON | White | N | |
| Boot up complete (Bluetooth connected with app) | ON | White | Y | |
| Reset start (press reset button for 5 sec.,wait for Yellow blinking, then release) | Yellow | Y | ||
| Rescue mode | Purple | N | ||
| Credential info (SSID/password/admin username and password)synchronizing with other Lyra | Blue | Y | ||
| Primary Lyra only | (the Lyra connecting to modem) | |||
| Primary: Boot up complete and can connect to Internet | Light Cyan | N | ||
| Primary: Boot up complete and Internet failed | Yellow | N | ||
2nd Lyra only (After Lyra is added in the network) | (the Lyra connecting to the CAP) | |||
| Boot up complete (but connection lost to primary Lyra) | Red | N | ||
| Boot up complete and connected to the Lyra network | Light Cyan | N | ||
| After set up with app, when applying settings, it will try to connect to the Lyra network | Blue | Y | ||
Ethernet backhaul (When using wired connection to connect previous Lyra device) | Green | N | ||
| Pairing | Behavior | LED |
| Lyra in the network | Pairing Trigger | Blink in Blue |
| Pairing connection failed | Back to the previous status | |
| Pairing connection OK | Back to the previous status | |
| The Lyra wants to add in to the network | Pairing Trigger | Blink in Blue |
| Pairing connection failed | back to previous status | |
| Pairing connection OK | Blink in Blue (synchronizing settings) |