[Phone] How do I assemble the ROG Kunai Gamepad (ROG Kunai holder + ROG Kunai controllers)? | Official Support

ASUS Support FAQ

FAQ

[Phone] How do I assemble the ROG Kunai Gamepad (ROG Kunai holder + ROG Kunai controllers)?

Assembly steps：
Push the ROG Kunai controllers down along both sides of the ROG Kunai holder until locked in.

Note：
1. ROG Kunai Gamepad can be assembled into three operating modules:
— ROG Kunai bumper + ROG Kunai controllers
— ROG Kunai bumper + ROG Kunai left controller
— ROG Kunai holder + ROG Kunai controllers (as shown in the example above)
2. ROG Kunai right controller cannot be used alone
3. ROG Kunai controllers (both left and right) don't have battery

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ