[Desktop Chassis] ASUS GT502 Case FIO Module Replacement | Official Support

ASUS Support FAQ

FAQ

Product TUF Gaming GT502

[Desktop Chassis] ASUS GT502 Case FIO Module Replacement

Note

Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly.
Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

Preparation
Tool: Phillips screwdriver PH2

1.Press the button hidden on the back side of the case to remove the 2 side panels.

2.Remove Front Panel

3.Remove the four screws in the red circle to remove the multi-function fan/HDD bracket in the right compartment.

4.Remove the 2 screws in front of the FIO.

5.Remove the 2 screws (red circle) on the rear side of the FIO to dismantle the FIO.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ