[Desktop Chassis] A23 Front glass panel disassembly and assembly instructions

[Desktop Chassis] A23 Front glass panel disassembly and assembly instructions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.

 

1. Upper hand thumb on front glass panel (Figure 1), Hold the top of the chassis with your other 4 fingers. (Figure 2)

2. Lower hand thumb on front glass panel (Figure 1), The other 4 fingers are holding the notch between the front panel and the chassis. (Figure 2)

3. Remove the front glass panel by pushing it upward.