[Healthcare system] Conducting body composition analysis with ASUS VivoWatch 6 | Official Support

ASUS Support FAQ

FAQ

Product ASUS VivoWatch 6

[Healthcare system] Conducting body composition analysis with ASUS VivoWatch 6

(1) How to Conduct Body Composition Analysis with ASUS VivoWatch 6

ASUS VivoWatch 6 utilizes Bioelectrical Impedance Analysis (BIA) technology through its electrical sensor to measure the wearer's body composition, including body fat percentage, hydration level, skeletal muscle mass, basal metabolic rate, and more. Consistently monitoring changes in body composition aids in tailoring personalized diet, exercise, and lifestyle plans.

(2) Steps for Performing Body Composition Analysis with ASUS VivoWatch 6

1. Access the body composition analysis feature and input your current weight before starting the measurement.

2. Lightly touch the sensor on the bottom left of the watch with your thumb while gently resting your index finger on the metal ring around the watch face, maintaining a still posture.

3. To prevent signal interference, make sure that your hands do not touch each other during measurement.

4. After you complete the measurement, the screen will display your body fat percentage, hydration level, skeletal muscle mass, and basal metabolic rate.

5. The health data collected will be promptly synchronized with your ASUS HealthConnect App on your smartphone.

(3) Troubleshooting Incomplete Body Composition Analysis

1. Please make sure that you have updated the MCU FW of your ASUS VivoWatch 6 to the latest firmware version through ASUS HealthConnect (Navigate to ASUS HealthConnect > Device > Software Update > Check for Updates).

2. Verify that your personal information settings in ASUS HealthConnect, such as gender, age, height, weight, and preferred wearing hand (left/right), are accurately configured.

3. Check the snugness of the watch band and confirm that the watch back firmly adheres to your wrist during the measurement process.

4. Keep the watch clean and dry, and consider lightly moistening your fingers with moisturizer before attempting another measurement.

(4) Is Calibration Necessary for Body Composition Analysis?

Calibration is not required for body composition analysis with ASUS VivoWatch 6.

(5) Individuals Ineligible for Body Composition Analysis

Body composition analysis is unsuitable for pregnant women, individuals under 20, or those using pacemakers, implantable cardioverter-defibrillators (ICDs), or other electronic devices.

(6) Disclaimer

The body composition analysis provided by this product serves as a reference tool and should not be used for medical diagnosis or treatment purposes. Please seek advice and treatment from qualified healthcare professionals for any health concerns.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ