[LCD Monitor]If your LCD monitor appears no image or abnormal display after connecting to the monitor's SDI port, please follow this FAQ

If your LCD monitor appears no image or abnormal display after connecting to the monitor's SDI port, 
please verify that the signal format being used is correct:
 

1. PA24US  only support Level A signal(not support Level B).

Incorrect signal settings may cause transmission failure. 
If a Level B signal is mistakenly interpreted by a Level A receiver, 
the image may appear split or distorted. 
 

2. Please confirm whether the signal format used is in the following list:

If still have problem,please follow below FAQ:
[LCD Monitor] Troubleshooting - No display after turning monitor ON
 

[LCD Monitor]Troubleshooting - Picture or Text blur／Display Position or Resolution not correct／Screen color is abnormal or random jitter/Display Flickers/line/Dead pixel