[DC] What should be paid attention to when install ROG Ryuo or ROG Strix LC 240mm AIO cooler? | Official Support

ASUS Support FAQ

FAQ

Product ROG-Z11

[DC] What should be paid attention to when install ROG Ryuo or ROG Strix LC 240mm AIO cooler?

When the ROG Z11 is in vertical orientation, the motherboard is rotated 90 degrees, which results in the micro-USB 2.0 connector used on these AIOs to push against a memory module installed in the memory slot closest to the CPU.

To prevent this, please use:

Option A: An angled Micro-USB to 5-pin USB extension cable or

Option B: An USB 2.0 right angle A male to Micro-USB B right angle male cable or

Option C: Flip the ROG Z11 to horizontal orientation

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ