[NUC] Error Code 31 in Device Manager for Smart Sound Technology on NUC | Official Support

Q: [NUC] Error Code 31 in Device Manager for Smart Sound Technology on NUC

Resolution Enable HD-Audio DSP in BIOS: Press F2 during boot to enter BIOS Setup Go to Advanced > Devices > Onboard Devices Enable HD-Audio DSP or Audio DSP . Press F10 to save and exit BIOS Setup.

ASUS Support FAQ

FAQ

[NUC] Error Code 31 in Device Manager for Smart Sound Technology on NUC

Resolution

Enable HD-Audio DSP in BIOS:

Press F2 during boot to enter BIOS Setup
Go to Advanced > Devices > Onboard Devices
Enable HD-Audio DSP or Audio DSP.
Press F10 to save and exit BIOS Setup.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ