[NUC] How to Disable Active Management Technology ( AMT) on NUC11 Models

Resolution

When booting the NUC, instead of pressing F2, you must press Ctrl + P to get to the Intel MEBX menu. Once there, follow the instructions below:

  1. Log into the Intel MEBX menu by clicking MEBx Login.  (Default password is admin)
  2. You will then be prompted to change the password. Follow the password convention below and take note of the new password and save it somewhere safe.
    • At least 8 characters
    • One Special Character (eg: @ or !)
    • One Number
    • One Capital Letter
    • One Small Letter
  1. Disable Intel (R) AMT, by default it is <Enabled>.
  2. Exit and save the changes.