[NUC] NUC 9 Extreme Compute Element is Unable to Boot after Connecting It to a Cooler Master NC100 Chassis Fan | Official Support

Q: [NUC] NUC 9 Extreme Compute Element is Unable to Boot after Connecting It to a Cooler Master NC100 Chassis Fan

Resolution To enable the NUC 9 Extreme Compute Element to support the Cooler Master NC100 chassis and fan assembly: Update the BIOS to version 0062 or above Refer to BIOS Update [QXCFL579]

ASUS Support FAQ

FAQ

[NUC] NUC 9 Extreme Compute Element is Unable to Boot after Connecting It to a Cooler Master NC100 Chassis Fan

Resolution

To enable the NUC 9 Extreme Compute Element to support the Cooler Master NC100 chassis and fan assembly:

Update the BIOS to version 0062 or above

Refer to BIOS Update [QXCFL579]

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ