[AIOT] Chassis intrusion header for Q670EI-IM-A | Official Support

ASUS Support FAQ

FAQ

Product Q670EI-IM-A

[AIOT] Chassis intrusion header for Q670EI-IM-A

This header is for a chassis-mounted intrusion detection sensor or switch, you can connect one end of the chassis intrusion sensor or switch cable to this connector.

The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced, and the signal is then generated as a chassis intrusion event.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ