[AI Router] Adding MITSUBISHI HEAVY Smart M-Air WF-RAC Devices to Home Assistant

Question

Accepted Answer

MITSUBISHI HEAVY's (Mitsubishi Heavy Industries) WF-RAC is a Wi-Fi controller module for their air conditioning units.

This guide will walk you step by step through integrating MITSUBISHI HEAVY WF-RAC devices into Home Assistant.

Prerequisites

Make sure you have completed the initial setup of your device using the official MITSUBISHI HEAVY app, connected it to your router, and confirmed it works properly.
HACS is installed. You can refer to the How to Install HACS guide.

1. Review the WF-RAC Module Documentation

2. Install the WF-RAC Module in HACS

On the HACS page, click the three-dot icon in the upper right and select [Custom repositories].

In the [Custom repositories] window, enter the following information:

Click on Smart M-Air (Mitsubishi WF-RAC) in the menu.

In the pop-up window, click [Download].

After installation, you will see a prompt in [Settings] that a restart is required

3. Restart Home Assistant

Click [Settings] --> [System] to activate the newly installed module.

Click the power icon in the upper right and select [Restart].

4. Add the WF-RAC Integration

After restarting, click [Settings] --> [Devices & Services].

Click the [Add integration] button in the lower right, then search for WF-RAC and select it.

5. Enter Device Information

Set the name and IP address of the WF-RAC device.

Specify the device location.

6. Integration Complete: View Devices

Once setup is complete, you will see your integrated device in the Home Assistant device overview page.

How to get the (Utility / Firmware)?

You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.

If you need more information about the ASUS Download Center, please refer this link.

FAQ