Knowledge Search

Show 1 - 10 of 423 matching results Filter by

The screen display is incomplete at left side under BIOS or DOS when connecting LG-D2792P monitor to the onboard VGA output

I found that when I connect LG-D2792P monitor to the onboard VGA output, the screen display is incomplete at left side under BIOS or DOS. Is th ...


Which motherboard/system can I install PEI-10G/82599-2S on?

PEI-10G/82599-2S supports ASUS Z10PH-D16 series, ESC4000 G3 series, RS720Q-E8 series models, etc. Note: The supported list of models are subjec ...


I have Asus MB based on Intel® 82574L, but why I couldn’t find any driver on ASUS or Intel’s website for Microsoft Windows Server 2012 R2?

or Intel’s website for Microsoft Windows Server 2012 R2? ASUS Motherboard model: Z9PA-D8, Z9PE-D8 WS, Z9PH-D16 are based on Intel® 82574L. Howev ...


Error code 80040154 when running Media Streamer

 When I try to run Media Streamer, I get the following error message. How do I resolve this issue?   Media Streamer requires Windows M ...


Which motherboard/system can I install MCB-10G-1T on?

Which motherboard/system can I install MCB-10G-1T on? MCB-10G-1T only support Z10PR-D16 motherboard/system.


How to install the MCB-10G-1T Ethernet card?

sp;Connect the black end of the signal cable to the OCP_LED1 header on the motherboard. 4.      Connect the white end of the s ...


I bought Intel BXTS13A heat sink, but it can’t match Z10PE-D16WS. Could you suggest us appropriate heat sink model that can fit it?

nk was designed for Desktop, so It wasn’t matched Z10PE-D16WS Server Motherboard, regarding the fit heat sink, please use support Intel Xeon E5-2600 v3 ser ...


How to install the CPU for ASUS RS720-E8-RS24-E?

To install a CPU: 1. Locate the CPU socket on the motherboard.   2. Press the left load lever down (A) then move it to the right (B) until it ...


How to populate system memory on Z10PG-D16 motherboard?

How to populate system memory on Z10PG-D16 motherboard? The motherboard comes with 16 Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sock ...


GPU Installation

et 3. Firmly hold the bracket then pull it up to detach it from the motherboard then set it aside    4. Prepare the air duc ...