P7P55D
P7P55D
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
*Note: Update Intel(R) Rapid Storage Technology Driver to v10.5.0.1026 to support full HDD capacity. (The downloaded file has contained the driver.)
1. Improve memory compatibility
2. Improve system stability
3. Update CPU Level up function
4. Update Marvell Option ROM
5. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Improve system stability
2. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Improve memory compatibility
2. Improve system stability
1.Fix system might hang when using Clarkdale i5 655 CPU and DIMM with 1600Mhz default SPD.
2.Fix BIOS setup might show incorrect Target DRAM Frequency when using DIMM with 1600Mhz default SPD.
1. Improve memory compatibility
2. Improve system stability
3. Fix 2.2T HDD size is wrong if Quick Boot option is disabled
4. Improve compatibility with some USB3.0 devices
5. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Improve memory compatibility
2. Improve system stability
3. Update CPU Level Up function
4. Show CPU/DRAM frequency in Bios setup screen
5. Fix system will stay at POST screen too long when iPod 80GB is connected
6. Fix DEL and F8 keys doesn't work with Microsoft Reclusa Keyboard
7. Fix tRRD option can't be set to values lower than 4
8. Revise items of option "J-Micron SATA/PATA Controller" to Enable/Disable
1.Update JMicron 361 Option ROM
2.Update EZ-flash 2 function
3.Fix some PCIEx1 LAN card can't be detected at PCH PCIEx1 slot.
4.Update CPU Level Up function.
5.Fix CPU power always show 2.5W in EPU software.
Support new CPUs.
Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Improve system stability
1. Improve memory compatibility
2. Improve compatibility with some USB device
3. Improve Auto Tuning performance
Improve compatibility with some USB device
1. Disable EIST and CIE functions if BCLK is higher than 150MHz
2. Support IXTU utility
Support Low Voltage DRAM Module
Improve system stability