For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 11.2.0.1006 and BIOS to version 3603 before enabling Intel Smart Response Technology.

Update procedure for users needing Intel Smart Response Technology:
(1)Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2)Install version Intel Rapid Storage Technology driver to version 11.2.0.1006
(3)Reboot the system, and update BIOS to version 3603, then reboot.
(4)Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5)Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.

For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 11.5.0.1207 and BIOS to version 3603 before enabling Intel Smart Response Technology.

Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 11.5.0.1207
(3) Reboot the system, and update BIOS to version 3603, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.

1.Improve Improve system stability.
2.Enhance compatibility with some USB devices.
3.Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us

For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 10.8.0.1003 and BIOS to version 3304 before enabling Intel Smart Response Technology.

Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 10.8.0.1003.
(3) Reboot the system, and update BIOS to version 3304, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.

1.Improve system stability.
2.Improve memory compatibility.
3.Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
* Enable support for Intel Next Gen 22nm Processor E1 stepping MP version CPU.

Note:
1. For complete Intel Next Gen 22nm Processor support, please update the driver of Intel MEI, Intel VGA and Lucid Virtu technology to below version.
Intel(R) Management Engine Interface V8.0.0.1262 for Windows XP/Vista/7 32bit & 64bit.(WHQL)
Intel(R) Graphics Accelerator Driver V8.15.10.2598 for Windows 7 32bit & 64bit.(WHQL)
Intel(R) Graphics Accelerator Driver V6.14.10.5398 for Windows XP 32bit & 64bit.(WHQL)
Lucid Virtu Software V1.2.112.20176 for Windows 7 32bit & 64bit

2. Do not shut down or reset the system to prevent system boot up failure while BIOS is updating.

1. Enable support for Next Gen 22nm Processor.

1. Fix FW54P PCI card compatibility issue
2. Fix the bug that the OEM activation version OS of window7 will hang at the "blue screen" if some graphics cards be installed in system.
3. Fix USB Keyboard 3R-FKB3010UBK can't work issue
4. Fix Microsoft V1 receiver can't work issue
5. Fix S3 can't resume if CPU PLL over voltage is enabled.
6. Fix the CPU and Chassis Fan speed will over the duty cycle setting range.
7. Fix CPU ratio always keep at lowest after S4 resume and AC power lost.
8. Improve DRAM compatibility.
9. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us

1. Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release
2. Improve DRAM compatibility
3. Improve System stability
4. Improve compatiblity with some Raid card model
5. Increase IGD share memory size to 512MB

Note: For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 10.6.0.1002 and BIOS to
version 0606 before enabling Intel Smart Response Technology.

Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 10.6.0.1002.
(3) Reboot the system, and update BIOS to version 0606, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.

1. Enable the support of Intel Rapid Storage Technology version 10.5.0.1026 Release

Note: For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 10.5.0.1026 and BIOS to version 0501 before enabling Intel Smart Response Technology.

Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 10.5.0.1026.
(3) Reboot the system, and update BIOS to version 0501, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.