BIOS & Firmware
- Treiber & Tools
- BIOS & Firmware
Update MicroCode to support Harpertown E0/Wolfdale-DP C0 processors.
DSGC-DW BIOS, Version 1006
1. Fixed Run ASUS update system pop the message as attach file.And can't execute ASUS update.
Note(s): OS:XP x64 SP2
2. Fixed Winbone W39V080F device flash was unstable.
3. Fixes CPU1 and CPU2 information sometimes will exchange the position on post screen.
4. Fixed DMI table type04-processor CPU2 voltage not detect
5. Fixed Power Management Issue:
If try to wake up system from S1 via windows schedule task, the monitor would not be light up. We must press any key or move mouse to light up it.
6. Fixed recovery function doesn't start.
7. When Intel Xeon X5355 2.66GHz/Stepping G0 in CPU1 + Intel Xeon X5355 2.66GHz/Stepping B3 in CPU2 check DMI Table Type 04 - Processor Information, The Information shown will be incorrect.
8. IF Intel Xeon X5355 2.66GHz/Stepping B3 in CPU1 + Intel Xeon X5355 2.66GHz/Stepping G0 in CPU2 check DMI Table Type 04 - Processor Information, The Information shown will be incorrect.
DSGC-DW BIOS Version 1004
1. Fix DSGC-DW/SAS ACPI IO Stress test fail.
2. Fix Clovertown(E5300 series)/Woodcrest(E5100 series) L1 Cache Size was displayed incorrectly in BIOS Setup.
3. Updates onboard ESB2 SATA RAID ROM to be: LSI MegaRAID Software RAID BIOS Version A.01.01021804R.
4. Fixes ASWM installation failure at Windows Server 2003 R2 x64.
5. Removed the BMC LAN "NetMask" setting item in BIOS setup menu.
6. Fixes ASMB2_ASMB3-SOL - BIOS IPMI System Event Log sensor name showed "00 - (unknown)".
7. Fixes DSBV-DX/SAS - (1)In Processor(Type 04), the voltage always shows 1.4V whenever using Clovertown, Woodcrest and Dempsey processor.
8. Fixes ASMB2_ASMB3-SOL - When press button "Reset to BIOS", there is a error message and shows:"Read POST state error, transmit not start.", server can't enter BIOS setup screen.
9. Fixes ASMB2_ASMB3-SOL - When press button "Ctrl+Alt+Del", server can't restart and shows word:"^_?" in SOL command line.
10. Fixes ASMB2_ASMB3-SOL - If set baud rate to be 57600,the SOL screen would be not smooth and often lose characters.
11. Changes default values of "SYSTEM1 Target Temperature" and "SYSTEM2 Target Temperature" from 60 degree C to be 70 degree C.
12. Fixes ASMB2_ASMB3-SOL - In BIOS Utility, the "Remaining Event Log number" should show numbers of Remaining Event Log, but the current value shows " unknown ".
13. Fixes ASMB2_ASMB3-SOL - In BIOS Setup Utility, the "BMC Hardware/Firmware Version " should show " 1.01G/1.02 ",but the current version shows " 1.01.02.00000000 ".
14. Fixes ASMB2_ASMB3-SOL - 1.If install ASMB3-SOL, Hardware Monitor sometimes disappear after system reboot. 2.If install ASMB3-SOL, Hardware Monitor couldn't detect CPU and System temperature.
15. Fixes ASMB2_ASMB3-SOL - In IPMI setup menu, the item "IP Address" only shows [xxx.xxx.xxx.xx]. The correct value should be [xxx.xxx.xxx.xxx]. The last number only appears when we select this item.
16. Fixes ASMB2_ASMB3-SOL - In BIOS Utility, the "Remaining Event Log number" should show numbers of Remaining Event Log, but the current value shows " unknown ".
DSGC-DW BIOS Version 1003
Update to pass vista WHQL
1. Flash BIOS command：phlash16 /mode=3[BIOS file name]
2. Onboard Device Option ROM(s)：
Video：ALC 882
LAN：Intel(R) Boot Agent GE v1.2.36
SATA RAID：Intel(R) RAID for SATA - v5.6.2.1002, LSI MegaRAID Software RAID BIOS Version A.01.07251734R
AHCI：Serial ATA AHCI BIOS, Version iSrc 1.08 09072006
AHCI RAID：Serial ATA AHCI BIOS, Version iSrc 1.08 09072006
