- Controladores y utilidades
- Información
- Manuales & Documentación
- Garantía
- More Service
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
Latest beta BIOS.
Latest beta BIOS.
Fix system will hang when MD6456UPS T68AA-02C3 DDR-266 Dimm installed.
Fix system will hang when MD6456UPS T68AA-02C3 DDR-266 Dimm installed.
Support P4-Celeron CPU.
Support P4-Celeron CPU.
Support LBA-48bit addressable mode.
Fix the abnormal display RTC time/date on BIOS setup menu.
Fix the bug that pressing power button will result in the system hang when disable "Power Management and Power Button < 4 sec Suspend mode under DOS" on BIOS menu.
Fix the bug that add-on card cannot display on SIS650 serial M/B when set Primary VGA BIOS to on-board VGA but disable on-board VGA function.
Set "Command Lead-off Time" to 2T by default when DRAM Freq. >= 133MHz in order to gain the DRAM compatibility.
Support LBA-48bit addressable mode.
Fix the abnormal display RTC time/date on BIOS setup menu.
Fix the bug that pressing power button will result in the system hang when disable "Power Management and Power Button < 4 sec Suspend mode under DOS" on BIOS menu.
Fix the bug that add-on card cannot display on SIS650 serial M/B when set Primary VGA BIOS to on-board VGA but disable on-board VGA function.
Set "Command Lead-off Time" to 2T by default when DRAM Freq. >= 133MHz in order to gain the DRAM compatibility.
Fix certain USB abnormal conditions resume from S3.
Fix HCT ACPI Check_Pre-OS bug.
Fix primary VGA BIOS set onboard VGA in BIOS setup menu, but it will boot from AGP VGA card.
"Due to the structure of BIOS 1004 is reorganized, if your system can not boot up after updating BIOS version from 1001 to 1004, please clear CMOS to fix it. Sorry for any inconvenience."
Fix certain USB abnormal conditions resume from S3.
Fix HCT ACPI Check_Pre-OS bug.
Fix primary VGA BIOS set onboard VGA in BIOS setup menu, but it will boot from AGP VGA card.
"Due to the structure of BIOS 1004 is reorganized, if your system can not boot up after updating BIOS version from 1001 to 1004, please clear CMOS to fix it. Sorry for any inconvenience."
