BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1.Fix the issue users keep pressing Fn+F10/F11/F12, it will become “h” , “b” or “c” input instead.
2.Fix that sometimes system will hang at blackscreen
3.Fix the issue the AC status can not be updated
4.Support RealTek audio
1.Fix system will boot to setup during Win8 factory process when fastboot enabled.
2.Fix the panel light can be turned off when change Display brightness to number0 under WIN8 OS.
3.Fix OS will enter DeepS3 slowly and can't wake up Automatically.
4.Fix the issue that SD Card would lost sometimes when resume from DS3.
1.Fix the issue that the SPI Clock is not set when the value of WODT(0x80) is not 0x02.
2.Fix the issue when set launch CSM as disable and FastBoot as enable under BIOS Setup,then use winflash to flash bios,the model name shows error code.
1.Fix the issue system enters deep S3 then wake up and cannot enter S4 after setting system sleep 1 min later and hibernate 2 min later.
2.Support Pre-charge function.
3.Support 2013 Erp Power Saving.
4.Fix the issue system Can't resume from deep s3 when aging.
First release