[ Projector ]The unit can't project by using VGA cable on Macbook Air | Official Support

ASUS Support FAQ

FAQ

[ Projector ]The unit can't project by using VGA cable on Macbook Air

Please follow below steps to check/adjust :

1) Make sure you use the Apple's original thunderbolt to VGA transfer cable for connection.

2) Make sure the cables is normal and connected well.

3) Reset the device to default setting and try again. Please refer to How to reset the unit to default setting

4) If the issue still exits after setting default, please contact your local technique support center or service center for help. https://www.asus.com/support/CallUs

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ