What PCIe slots can be used when only installing CPU1 on Z10 server/WS board? | Official Support

ASUS Support FAQ

FAQ

Product ESC4000 G3, ESC4000 G3S, ESC8000 G3, RS520-E8-RS12-E, RS520-E8-RS12-E V2, RS520-E8-RS8, RS520-E8-RS8 V2, RS540-E8-RS36-ECP, RS700-E8-RS4, RS700-E8-RS4 V2, RS700-E8-RS8, RS700-E8-RS8 V2, RS720-E8-RS24-E, RS720-E8-RS24-ECP, TS700-E8-PS4, TS700-E8-PS4 V2, TS700-E8-RS8, TS700-E8-RS8 V2

What PCIe slots can be used when only installing CPU1 on Z10 server/WS board?

Please check block diagram in Z10 series models user manual.

For example, if you use CPU1 on Z10PE-D16 WS, only PCIe 2/3/4 can be used.

If you would like to use all PCIe slot, you have to use dual CPU on Z10 server/WS board.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ