[Computer Chassis] AP201 Case FIO Module Replacement

[Computer Chassis] AP201 Case FIO Module Replacement

Notice

1. Protect hands by wearing gloves before disassembly or assembly. Handle parts carefully, especially corners, to prevent scratches.

2. Handle glass side or front panels with extreme care during disassembly to prevent collisions, falls, or undue stress.

3. During disassembly, lay the case flat on a stable surface to prevent the side panel from falling.

4. Neatly arrange relevant wires during assembly to prevent damage to the wires.

5. Track all screws and small components during disassembly and assembly to avoid losing any parts..  

Preparation 
Tool:  Phillips screwdriver PH2

1.Remove 2 side panels. 

2.Remove top dust cover and front panel.

3.loosen two screws on the FIO Module and take out the FIO Module.