ROG ROG
Creators Creators
Gaming
Business
Support

Tinker Board S

  • Where to buy
  • Overview
  • Review
  • Support
Notify me
ARM-based SBC with enhanced and better compatibility
OP product mainImage
Tinker Board S

Tinker Board S

Tinker your way to the future

The new and improved Tinker Board S is a single board computer (SBC) that offers greater durability, better stability and an overall improved user experience for DIY enthusiasts and makers everywhere.

  • More Durable

    • Onboard 16GB eMMC storage to enhance performance and stability, plus a microSD slot for greater flexibility

    • Low-voltage input detection to avoid power issue and ensure system stability if using a non-qualified* power supply

  • Better User Experience

    • HDMI-CEC-ready for complete video entertainment, allowing users to command both Tinker Board S and a TV with a single remote control

    • Audio jack plug-in detection and auto-switch to 3.5mm audio jack from other interfaces

  • Always Moving Forward with Makers

    • Onboard power-on pin for makers giving more freedom when bringing their ideas to life.

    • Enhanced I2S pin with Slave mode and an improved software API for better compatibility

* Non-qualified power supplies present a power output that differs from the value listed in the product specifications.



Learn More


Tinker Board S Tinker Board
Processor Cortex-A17 Quad-core 1.8GHz
Display 1 x 15-pin MIPI DSI supports up to HD
1 x HDMI up to 4K/30fps
*HDMI CEC Hardware Ready		 1 x 15-pin MIPI DSI supports up to HD
1 x HDMI up to 4K/30fps
Memory Size Dual-CH LPDDR3 2GB
Storage Onboard 16GB eMMC
Micro SD(TF) card slot		 Micro SD(TF) card slot
Connectivity 1 x GB LAN
1 x wireless 802.11 b/g/n & BT 4.0 + EDR
Audio RTL HD Codec with 1 x 3.5mm audio jack
*Supports Plug-in Detection and Auto-Switch		 RTL HD Codec with 1 x 3.5mm audio jack
USB 4 x USB 2.0 ports
Internal Headers 1 x 40-pin GPIO header w/ enhanced I2S
1 x 2-pin eMMC recovery header
1 x 2-pin Power-on header		 1 x 40-pin GPIO header
1 x 2-pin contact points
Power Connector Micro USB (5V/2~3A)
*Supports low voltage input detection		 Micro USB (5V/2~3A)
OS Support Debian 9 / Android 6
Dimension 3.37" x 2.125"
back

1 Micro USB power-in
2 Default
disable
Power-on eMMC Recovery
3 HDMI
4 MIPI CSI
5 192K/24bit
HD Audio
6 GbE LAN
7 PWM
8 S/PDIF
9 MIPI DSI
10 802.11 b/g/n Wi-Fi & Bluetooth 4.0 + EDR
11 Upgradable i-PEX
antenna header
12 40-pins GPIO header
13 MicroSD Slot
14 USB 2.0 Ports

Features & Functionality

Class-Leading Performance

With its powerful and modern quad-core ARM-based processor — the Rockchip RK3288 — Tinker Board S offers significantly improved performance versus other popular SBC boards. To provide the flexibility needed for different builds and projects, Tinker Board S features 2GB of LPDDR3 dual-channel memory and is equipped with an onboard 16GB eMMC and SD 3.0 interface that offer significantly faster read and write speeds for the OS, applications and file storage.

Robust GPU Performance & Functionality

Featuring a powerful but energy-efficient design, Tinker Board S supports next-generation graphics and GPU computing API's. Powered by an ARM-based Mali™-T760 MP4 GPU, Tinker Board S' GPU and fixed-function processors allow for a wide range of uses, including high-quality media playback, gaming, computer vision, gesture recognition, image stabilisation and processing, as well as computational photography and more.

Tinker Board S has HDMI CEC hardware circuit implemented, with the supported software, it allowing multimedia enthusiasts to control TV outputs using a single remote control for a better entertainment experience. Other fixed functions include H.264 and H.265 playback support, as well as HD and UHD video playback.*

*HD and UHD video playback at 30 fps on Tinker Board S is currently available via the included media player. Third-party video players and applications may not offer hardware acceleration, which will result in limited or unstable playback performance. Please refer to the FAQs for more information.

HD Audio Quality

Further improving on key areas found lacking on many SBC boards, Tinker Board S is equipped with an HD codec that supports up to 24-bit/192kHz audio. Its integrated audio jack supports audio output and a microphone in, without an extension module. The audio jack also offers hassle-free plug-in detection so it automatically switches the audio output to an audio jack when the speaker or headset is connected.

Maker-Friendly, with IoT Connectivity

Tinker Board S features standard maker connectivity options, including a 40-pin GPIO interface and enhanced I2S interface with Master and Slave modes for improved compatibility. With the GPIO API, Tinker Board S allows for interfacing with a range of inputs from buttons, switches, sensors, LEDs, and much more. Tinker Board S is equipped with one DSI MIPI connection for displays and touchscreens. A secondary CSI MIPI connection for compatible cameras allows for computer vision, and much more.

Tinker Board S also features Gbit LAN for Internet and network connectivity. A dedicated bus resource designed for the LAN port ensures consistent Ethernet performance. The integrated Wi-Fi and Bluetooth controller on the Tinker Board S is shielded with a metal cover to ensure minimal interference and improved radio performance. An integrated IPEX antenna header allows for easy antenna replacement or upgrades.

Tinker Board S also features a full-size HDMI output. Additionally, it includes four USB 2.0 ports for extensive peripheral and accessory connectivity.

Enhanced DIY Design

Careful consideration went into the design and development of the Tinker Board S to ensure that it provides a superior user experience for first-time builders or for seasoned hobbyists. Builders will appreciate the colour-coded GPIO header, which makes it easy to recognise respective pin headers.

The PCB dimensions and topology of the Tinker Board S align with standard SBC boards, allowing support for a wide range of chassis and physical accessories. The PCB features silk-screening with a connection header and location callouts, for improved connection clarity. The onboard MIPI headers also feature colour-coded pull tabs.

Tinker Board S also includes a heatsink, which helps improve heat dissipation under heavy loading or in hot ambient environments.

TinkerOS ‧ Supported OS ‧ Applications

A Debian-based distribution ensures a smooth and functional experience, directly out of the box. Whether it's browsing the web, watching videos, or writing scripts, TinkerOS is a great starting point for your next project or build.

Furthermore TinkerOS has been carefully designed to be extremely lightweight and responsive. Running on top of the base Debian 9 is a the LXDE desktop environment. This GUI is optimised specifically for SBC boards. It also features plug & play NTFS support allowing for easy access to Windows based flash drives and external hard drives. The included web browser has also been carefully selected and optimised. It based on Chromium allowing for speed and stability along with a number of extensions. The ASUS team has help to enable hardware acceleration of the browser allowing for improved web rendering and video playback including HD resolutions in YouTube.

TinkerOS also includes a number of popular applications allowing for easy programming and development. These include IDLE / Python as well as Squeak / Scratch.

Beyond TinkerOS and its Debian Linux offering Tinker Board S also support the Android Operating system. This allows for an entirely different usage scenarios ranging from media playback, gaming, and much more.

Tinker Board S is also working closely with a wide range of popular applications to enable support & optimise functionality.

Tinker Board S Performance

CPU Performance

Tinker Board S features an ARM-based RK3288 SoC and is equipped with four cores to enhance multithread application performance. It operates at frequencies of up to 1.8GHz, improving performance across all applications. This increase in CPU core count, along with an increase in processor frequency, helps to enable significantly faster performance across a wide range of applications, extending and enhancing project capabilities. As a result, typical PC tasks are faster and more responsive.
Learn More

GPU Performance

Tinker Board S' GPU is based on the Mali™-T760 MP4. It offers up 4 cores and a 600MHz clock speed. When compared to competitor SBC GPUs, Tinker Board S offers better GPU computing and GPU acceleration performance.

Stream and Memory Performance

Tinker Board S' offers dual-channel DDR3 which delivers better memory bandwidth versus competitor devices that offer only a single-channel DDR2.

eMMC & SD Card Read/Write Speed

Tinker Board S' has a microSD slot for onboard expandable storage. It supports the SD 3.0 standard, so it can use higher capacity microSD cards that offer significantly faster read and write performance.

．Read speeds: up to 422% faster
．Write speeds: up to 226% faster

*Card spec: ADATA Premier UHS-I C10 64GBexFAT

Network/Audio Specifications

Specification Wi-Fi Audio Format
/ Sample Rate		 Audio Function
Tinker Board Series 802.11 b/g/n with upgradable IPEX antenna Play: 24bit/192KHz, Record: 24bit/96KHz Audio output, Microphone input
Competitor SBC 802.11 b/g/n 16bit/48KHz Audio output only

Networks Performance

Tinker Board S features gigabit Ethernet, which offers significantly improved throughput versus competitor SBCs that are equipped with 10/100 Ethernet.

．Transfer/receive speeds
Tinker Board S' dedicated controller and non-shared bus design ensure superior packet delivery and reception. LAN performance remains the same on the Tinker Board S during USB transfers versus LAN performance of competitor SBC's which experience up to an 18% reduction in speed during USB transfer.

．LAN performance with USB transfer

USB Speed

Tinker Board S offers superior read and write performance with external storage drives, allowing quicker read and write speeds. This improves workflow, copying, backups and overall file usage.

．Read speeds: up to 154% faster
．Write speeds: up to 6% faster

*Card spec: Kingston DataTraveler 64GB USB3.0

Wi-Fi Performance (Signal Loss)

Tinker Board S Wi-Fi performance is more robust than most competitor devices, allowing for improved signal reception.
Location: OctoScope platform
Target AP: ASUS RT-AC66U (Broadcom) 		Standard: b/g/n mixed
Channel: 6
Bandwidth: 20MHz
Security: none

*Tinker Board S- OS: Linux 4.4.0+ armv7l l Image Version: V20170113 l Memory Type: 2GB l CPU Type, Speed[GHz]: Cortex-A17 Quad-core 1.8GHz l GPU Type, Speed[MHz]: Mali™ T-764
*Competitor SBC - OS: Linux 4.4.11+ armv7l l Memory Type: 1GB l CPU Type, Speed[GHz]: Cortex-A53 Quad-core 1.2GHz l GPU Type, Speed[MHz]: VideoCore IV

back

Community ‧ Contact Us

For inquiries relating to product qualification & validation and application support or peripheral & accessory support, please contact us at TinkerBoard@asus.com


Share your idea with us via

Documentation

Getting started

Requirement:

．1 x Micro-USB cable with data transfer functionality
．1 x Tinker Board power supply* or other qualified 5V/2-3A power supply**
．1 x Monitor
．1 x HDMI cable
．1 x Keyboard and mouse set

* Tinker Board power supply sold separately
** Cable must deliver up to 3A of power output

1. Connect Tinker Board S to a PC using a Micro-USB cable. Within seconds, the PC should recognise it as a USB mass storage device.
2. Download the TinkerOS image from the website and flash it into Tinker Board S using third-party ISO software such as Win32Disk Imager or Etcher.
3. Connect the power supply, keyboard, mouse and monitor to your Tinker Board S to boot up.


Hardware

The Tinker Board S requires 5V/2~3A power via the micro-USB port. The exact amount of current (mA) the Tinker Board S requires will depend on what's connected to it. For general use, a 2A power supply from a reputable retailer will provide ample power to run your tinker board.

Typically, Tinker Board S uses between 700 to 1000mA, depending on which peripherals are connected. It may use as little as 500mA when no peripherals are attached. Maximum power for the Tinker Board S is 1A. If you need to connect a USB device to bring power requirements above 0.5A, then you must connect to it via an externally powered USB hub.


The Tinker Board S is equipped with four USB 2.0 ports. These are connected to the GL852G USB Hub from the upstream USB port via the RK3288.

The USB ports enable the attachment of peripherals such as keyboards, mice and webcams. This provides the board with additional functionality.

There are some differences between the USB hardware on the Tinker Board S and the USB hardware on desktop computers, laptops and tablets.

The USB host port inside the Tinker Board S is for power supply only, RK3288, was originally intended to be used in the mobile market, e.g. the single USB port on a phone for connection to a PC, or to a single device. In essence, the OTG hardware is simpler than the equivalent hardware on a PC.

OTG typically supports communication to all types of USB devices, but to provide an adequate level of functionality for most of the USB devices that one might plug into a tinker board, the system software has to do more work.


Learn More

Supported Devices

In general, every device supported by Linux can be used with the Tinker Board S (exceptions are detailed below). Linux offers a comprehensive driver database that supports legacy hardware for most operating systems. TinkerOS and it's Debian kernel have a large number of inbox drivers for common peripherals & devices.

If you have a device and wish to use it with a tinker board, then plug it in. Chances are that it will be compatible. If you're running a graphical interface (such as an LXDE desktop environment in the OS), then it's likely that an icon or other message will pop up to announce the new device.


Port Power Limits

The device advertises its own power requirements to the USB host when it is first connected. In theory, the actual power consumed by the device should not exceed stated specification.
It should be noted that hot-swapping high-powered devices into the tinker board's USB ports may result in a brownout, which may cause the Tinker Board S to reset.


back

One powerful feature of the Tinker Board S is the row of available GPIO (general purpose input/output) pins along the edge of the board. These pins are a physical interface between the Tinker Board S and the outside world. At the simplest level, you can think of them as switches that can be turned on or off. Of the 40 pins, 28 are GPIO pins (shared with SPI/UART/I2C pins). The Tinker Board S is equipped with one SPI bus that offers two chip selects. The SPI bus is available on the onboard 40-pin header.


GPIO API

Python

Python is a programming language that lets you work quickly and integrate systems more effectively.

1. Open a terminal and Install dependency package.
sudo apt-get update
sudo apt-get install python-dev python3-dev

2. Download Python GPIO library*
git clone http://github.com/TinkerBoard/gpio_lib_python.git

3. Navigate to folder
cd gpio_lib_python/

4. Install Python GPIO library for Tinker Board S
sudo python setup.py install
sudo python3 setup.py install 

5. Reference codes
There're few sample codes under this folder /gpio_lib_python/test

*If get “git command not found”, please install git first by apt with follow commands. sudo apt-get update
sudo apt-get install git

C

C is a general-purpose, imperative computer programming language, supporting structured programming, lexical variable scope and recursion, while a static type system prevents many unintended operations.

1. Open a terminal and download C GPIO library*
git clone http://github.com/TinkerBoard/gpio_lib_c.git

2. 2. Navigate to folder
cd gpio_lib_c/

3. Install C GPIO library for Tinker Board S
sudo ./build

4. Check install success or not
gpio -v
gpio readall

5. Reference codes
There're few sample codes under this folder /gpio_lib_c/examples

*If get “git command not found”, please install git first by apt with follow commands.
sudo apt-get update
sudo apt-get install git

GPIO pinout

If you would like to control GPIO's SPI, I2C or serial(UART) with Python, it is recommended to use 3rd party or open source Python library, such as spidev, smbus2 or pySerial.
GPIO.Setmode
(GPIO.ASUS)		 GPIO.Setmode
(GPIO.BOARD)		 Pinout Physical Pin
Number		 Pinout GPIO.Setmode
(GPIO.BOARD)		 GPIO.Setmode
(GPIO.ASUS)
1 VCC3.3V_IO
 12 VCC5V_SYS
 2
252 3 GP8A4_I2C1_SDA
 34 VCC5V_SYS
 4
253 5 GP8A5_I2C1_SCL
 56 GND
 6
17 7 GP0C1_CLKOUT
 78 GP5B1_UART1TX
 8 161
9 GND
 910 GP5B0_UART1RX
 10 160
164 11 GP5B4_SPI0CLK_UART4CTSN
 1112 GP6A0_PCM/I2S_CLK
 12 184
166 13 GP5B6_SPI0_TXD_UART4TX
 1314 GND
 14
167 15 GP5B7_SPI0_RXD_UART4RX
 1516 GP5B2_UART1CTSN
 16 162
17 VCC33_IO
 1718 GP5B3_UART1RTSN
 18 163
257 19 GP8B1_SPI2TXD
 1920 GND
 20
256 21 GP8B0_SPI2RXD
 2122 GP5C3
 22 171
254 23 GP8A6_SPI2CLK
 2324 GP8A7_SPI2CSN0
 24 255
25 GND
 2526 GP8A3_SPI2CSN1
 26 251
233 27 GP7C1_I2C4_SDA
 2728 GP7C2_I2C4_SCL
 28 234
165 29 GP5B5_SPI0CSN0_UART4RTSN
 2930 GND
 30
168 31 GP5C0_SPI0CSN1
 3132 GP7C7_UART2TX_PWM3
 32 239
238 33 GP7C6_UART2RX_PWM2
 3334 GND
 34
185 35 GP6A1_PCM/I2S_FS
 3536 GP7A7_UART3RX
 36 223
224 37 GP7B0_UART3TX
 3738 GP6A3_PCM/I2S_SDI
 38 187
39 GND 3940 GP6A4_PCM/I2S_SDO 40 188

* We strongly recommend that you regularly backup all data stored in the device. ASUS shall not be liable for any damage to or loss of programs or data stored in the Tinker Board series, and shall not be responsible for data recovery, backup, or any charges arising therefrom.


* In no event shall ASUS be liable for any defect, damage or data loss arising from product repair or replacement.

  • Overview
  • 3rd Party Partners
  • Performance
  • Community ‧ Contact Us
  • Videos
comparison icon
Compare (0)
Networking
AIoT & Industrial Solution
All series
Tinker Board S

Shop and Learn

Community

  • Instagram
  • YouTube
  • Facebook
  • Twitter
  • Pinterest
United Kingdom / English Terms of Use Notice Privacy Policy ©ASUSTeK Computer Inc. All rights reserved.